Reset Refugium. Cleaned MarinePure blocks & Removed 90% of inhabitants. Washed fuge tank. Replaced about 4" ball of cheato w/ some bugs
April 13, 2019 15:45
Removed Carbon MediaPlaced new Waste Away Gel strip in fuge. Cleaned Foam Filter. Main Flow Meter working now, was not plugged in, however #3 flow meter for fluidizing reactor has failed reading 0GPH.
NaCO3 dosing increased from 4min to 4:30min. DKH 7, pH 7.87 Flow meter on main return broken. Maxspect Gyre 230 installed 1month, seems good. Refill CaCl
February 24, 2019 10:18
NaCO3 dosing increased from 3.5" to 4"
CaCl dosing increased from 2.5" to 3"
Removed Rocks and hand picked off green mushrooms - infestation.
Removed 4 Rose Bubbletip Anemone's - Trade Coral Corall Store credit $60
Removed powerhead from refugium
Unplugged Apex water detector - broken? False alarms
Removed LifeReef Fractionator
Installed Eshopps S-200 Fractionator
Re-Rockscaped to isolate anemones on right side of tank
NaCO3 dosing Increased from 3:00 min to 3:30 min
March 19, 2018 15:55
NaCO3 dosing lowered from 4" to 3"
CaCl dosing increased from 2" to 2.5"
January 20, 2018 11:29
Most corals under stress/dying. Nitrate ~20ppm, f/u needed.
November 26, 2017 12:20
Durso Drain valve OPEN
CaCl ATO PAUSED atm r/t Ca@500.
Corals seem stunned, not happy? Outside Air Pump broken, need replacement.
Lowered Kessil H80 to closer to fuge to assist w cheato growth.
November 5, 2017 11:58
Complete Return pump/plumbing overhaul. Vectra M1 with new PVC tree, FMM, Increased return tubing diameter (reduced afterload). Vectra M1 ~50% power = 500GPH to display + 160GPH to refugium. Total Flow from M1 ~660GPH @ 50% power.
Visual inspection of return flow to main display appears much greater than previous on the MagDrive1200. Estimation I was probably returning ~200GPH on the old pump (with older constrictive plumbing).
Refugium drain won't allow intake flow excess of ~170GPH atm.
System noticeably quieter after syncing drain/return. Closed Durso Drain air valve.
August 28, 2017 22:03