RODI
V2 Pure 100 RO Unit
Installed on September 1, 2014
Reactor
D-D Fluidised Reactor
Filled with activated carbon
Installed on June 14, 2014
UV
TMC 30 UV Sterilizer
Installed on September 22, 2013
TestKit
Salifert Phosphate (PO4) Test kit
Installed on September 19, 2013
TestKit
Red Sea Calcium Pro Ca Test Kit
Installed on September 6, 2013
TestKit
Red Sea MCP Marine Care Test Kit
Installed on September 3, 2013
Media
Rowaphos
Installed on September 3, 2013
Sump
Freshwater top-up tank
Positioned adjacent the water change tank, size 20x45x50, a small reservoir of freshwater to auto top up the system.
Installed on September 1, 2013
Reactor
Bubble Magus C100 Calcium Reactor
Runs off the Fluidised Reactor Pump Initial PH 8.0 Drained system on 1/9/13 to rinse media PH of effluent 6.5 1/9/13
Installed on August 31, 2013
Reactor
D-D Fluidised Reactor
Filled with Rowa-Phos
Installed on August 31, 2013
Sump
Equipment Sump
A small tank, 30x25x60, positioned next to the main sump to house the skimmers and calcium reactor.
Installed on August 31, 2013
Sump
Main Sump
My old tank, 90x60x60, modified to act as the sump for my new 1200 litre system.
Installed on August 22, 2013
Lighting
2 Maxspect Razor 420 LED 160w
set to Preset 2 - moonlight programme
Installed on August 22, 2013
Sump
Water Change Tank
Positioned below the sump, tank size 120x60x45, this will allow me to drain off, mix and replenish water without too much disruption to the main tank.
Installed on August 22, 2013
Powerhead
2 Tunze 6105
Controlled by Wave Controller 7092
Installed on August 22, 2013
Refugium
Cryptic Refugium
Positioned above the main sump, tank size 90x60x35, - will eventually be concealed.
Installed on August 22, 2013
Skimmer
2 Bubble Magus C7 Protein Skimmer
Installed on August 22, 2013